Обновился эмулятор Sony Playstation для Windows. Изменения:
- help: added PAL/NTSC Color Mods chapter (with info for older and newer boards)
- help: namco lightgun added U1 chip pinout & link to schematic (thanks nicolas)
- help: namco lightgun added U2 chip part number (BA7071F aka sync separator)
- help: scph-1150 notes: need delay, no rumble cfg cmds, different motor ctrl
- help: scph-1150 notes: field of motion 00,00-FF,FF (unlike scph-1200/scph-110)
- help: added/updated chipset/pinouts for scph-1150,scph-1180,scph-1200,scph-110
- emu/reset/init: forces [104Ah].bit6-style joypad reset (needed for deathball)
- bios clone: bugfixed chdir and findfirst functions (needed for deathball)
- bios clone: workaround on edge-triggered cdrom irqs (needed for deathball)
- bios clone: re-ordered cdrom cmd=setloc vs task=setloc (more reliable timing)
- bios clone: forces param fifo clearing (after unsupported vcd/secret cmds)
- bios clone: implemented screen centering option (formerly wasn't functional)
- xplorer/help: lots of info on Xplorer db25 protocol, memory map, chipset, etc
- datel/help: some more details on Datel db25 protocol, memory map, chipset, etc
- xplorer/datel/help: added FLASH commands, chip IDs, board detection, etc.
- help: chipless modchips chapter, with circuits/pinouts for pu-7 thru pm-41(2)
- spu/emu: allows reverb-output with DISABLED reverb-writes (raw pcm playback)
- spu/emu: supports MUTE flag from SPUCNT (mutes SPU audio, and also VCD audio)
- cdrom/help: caution Unsupported GetQ,VCD,SecretUnlock do need clr param fifo
- bios-clone: forces clearing param fifo (after SecretUnlock and VCD detection)
- bios clone: increased joypad-slot-select-delay (needed for SCPH-1150)
- bios clone: added video cd VCD software player (monochrome 10fps, 11kHz mono)
- bios clone: uses compression for GUI and VCD player (for 128Kbyte expansion)
- bios clone: uses tighter flush cache code (with loop instead of unrolled loop)
- cdrom loader: fixed crash upon newer .nrg files (those with "CUEX" chunks)
- vcd/help: specs for VCD format (iso, mpeg, mp2) (still lacks lowlevel details)
- vcd/help: added pinout and component list for scph-5903 (video cd console)
- mdec/help: q_scale=0 disables zagzig (can be useful for raw YUV-to-RGB)
- mdec/help: added note on EOB not being required after full blocks
- mdec/emu: reproduces zagzig-disable, and eob being not required on full blocks
- gpu/help: added GPU Versions chapter (all known old 160-pin gpu differences)
- card/help: updated Memory Card Notes (vmem, yaroze, compression, etc.)
- cdrom/help: added description for "cu2/bin files" (psio cdrom-image format)
- gui: fixed window positions/fullscr when taskbar at upper/left (thanx joseph)
- mips/mem: emulates main ram waitstates for unaligned mem (lwl/swl/lwr/swr)
- expansion/kernel: added installer functions in menu, utility, remote access
- expansion/kernel: new nocash bios clone version for xplorer and datel carts
- expansion/emu: prevents flash commands to destroy memory at 2AAAh/5555h
- xplorer: supports Xplorer on 80x86 side (for PC parallel port to PSX) (xboo)
- xplorer: supports Xplorer on MIPS side (in expansion version of bios clone)
- gpu/help: added pinouts for old 160-pin GPU, dual-ported VRAM, and RGB chips
- poc/help: added details on garbage_byte for memory areas without ldrb support
- poc/help: memory access times for ram/flash arm/thumb opcode/data reads
- poc/help: when rtc paused: rtc irq fires at 4096Hz (instead 1Hz)
- bios/mem: dynamically allocates psx bios (allows sizes bigger than 512Kbyte)
- mips/cop: somewhat emulates breakflags in bit0/bit1 of DCIC cop0r7 register
- snapshot: faster compression (omits large zerofilled areas from look-up-tree)
- gpu: fixed crash on NTSC-auto-center in .INI file (pic.ysiz=0) (thanx ricardo)
- help: added info on joy_mode.bit8 being clk polarity (thanx charles macdonald)

Источник:
http://problemkaputt.de