Форум Эму-Россия :: Просмотр темы

Форум Эму-Россия http://forum.emu-russia.net/

Altirra 2.0 http://forum.emu-russia.net/viewtopic.php?f=26&t=3635	Страница 1 из 1

Автор:	Newsbot [ 26 дек 2011, 11:20 ]
Заголовок сообщения:	Altirra 2.0
Обновился эмулятор Atari 800/800XL/130XE для Windows. Изменения: [breaking changes] - Debugger: The step over command has been changed from s to o. [features added] - UI: Added OS Screen size setting. - UI: Added support for gzip compressed images (.gz, .atz). - UI: Arrow key behavior is now configurable. - UI: Added speed options. - UI: Added option to control whether emulation sees the Shift key pressed after a Shift+F5 cold reset. - UI: Added MRU list for booted images. - UI: Color settings can now be exported as a palette file (*.pal). - UI: Display API options can now be changed through the GUI (not just cmdline). - UI: Added full screen resolution options. - UI: Added single instance option. - UI: Request 1ms system timer precision only when unpaused. - UI: Added option to bind file associations in Windows for image types. - UI: Added /run, /disk, /tape, and /cart switches to force load types on the command line. - UI: Added mute option. - Debugger: Added command aliases (ac, al, as, a8). - Debugger: Added watch expression (wx) command. - Debugger: Added multiple memory panes. - Debugger: Added watch panes. - Debugger: Initial version of debug display. - Debugger: Disassembler can now display offsets from symbols. - Debugger: Profiler now distinguishes between VBIs and DLIs in function sampling mode. - Debugger: Profiler now shows unhalted cycle counts and DMA contention rates. - Debugger: Added call graph profiling support. - Debugger: Mouse wheel is now position-based instead of focus-based. - Debugger: Address range breakpoints can now trigger commands. - Debugger: Added log output filter commands (lfd/lfe/lfl/lft). - Debugger: Added .ide command. - Debugger: Enter (e) command now takes expressions. - Debugger: Added bitwise/low-byte/high-byte operators and address/value variables to expression evaluator. - Debugger: Break on expression command (bx) can now include address ranges. - Debugger: Added dump double words (dd) command. - Debugger: Go (g) command now has options to preserve and force source mode. - Debugger: Added batch (.batch) command. - Debugger: Added source mode control (.sourcemode) command. - Debugger: Commands can now be queued to run when an EXE loads or runs. - Debugger: Source line breakpoints can now be set prior to line debug information being available. - Debugger: A matching .atdbg file is now processed when an executable loads. - Debugger: startup.atdbg in the program directory is now processed on startup if present. - Debugger: Ctrl+Up/Down from output window command line now scrolls log pane by single lines. - Debugger: Added fill (f), search (s), and move (m) commands. - Debugger: Register (r) command can now set individual flags. - Debugger: Improved output of .pia command. - Debugger: Call, loop, and interrupt collapsing in history window can now be toggled. - Debugger: History window can now show timestamps in cycles, unhalted cycles, and microseconds from an anchor point. - Debugger: Extended memory syntax now allows access to hidden RAM (r: prefix). - Debugger: Added .tape and .tapedata commands. - Disk: Added support for Write PERCOM Block command. - Disk: Added option to auto-detect firmware overrides of disk accesses and automatically disable SIO patch for those drives. - Disk: Live disk images can now be explored directly from the disk drive entry rather than requiring an unmount and remount. - Disk: Disk explorer shows timestamps. - Disk: .ARC compressed archives can now be explored. - Disk: Fixed a couple of bugs with DCM disk image decoding. - Cartridge: Added another Atrax 128K cartridge variant used for SpartaDOS X. - Cartridge: Added support for OSS 8K, Blizzard 4K, AST 32K, Atrax SDX 64K, Turbosoft 64K, and Turbosoft 128K types. - Cartridge: Added support for newer MaxFlash 1MB cartridges that power up in bank 0 instead of bank 127. - Cartridge: Added support for 1M Megacart (different type with similar name). - Cartridge: Added support for a 5200 64K cartridge with 32K banks. - Input: MultiJoy8 support. - Input: CX-80 and 5200 trackball support. - Input: 1200XL F1-F4 keys can now be enabled in keyboard options. - Input: ~ key is now an alternate mapping for the inverse key. - IDE: KMK/JZ IDE / IDEPlus 2.0 emulation support. - IDE: Initial SIDE emulation support. - IDE: Solid-state mode supports up through PIO mode 6. - IDE: Read-only physical disk access. - GTIA: SECAM support. - GTIA: Optimizations to mode 9 and mode 10 rendering. - MMU: Added 800 8K/24K/32K/40K configurations. - MMU: Added 320K and 576K Compy Shop configurations. - MMU: Sped up extended bank switching. - Simulator: Added XEGS support. - SoundBoard: Multiplier support. - POKEY: Rewrote sound core to defer repeating events whenever possible for extra speed. [bugs fixed] - ANTIC: Added emulation of bus data displaying at the very right border of a wide scrolled playfield. - ANTIC: Improved accuracy of mid scan line changes to HSCROL and DMACTL. - ANTIC: Fixed phantom DMA data during WSYNC. - ANTIC: Implemented phantom DMA artifacts along right side of wide playfield. - ANTIC: Fixed NMIs not being reactivated after a write to NMIRES on cycle 7. - Disk: PERCOM block is now initialized for a drive without a disk. - Disk: Fixed errors in PERCOM block track and sectors per track counts. - Disk: Switching a disk from R/W to VirtRW mode now clears pending flush errors. - Disk: Fixed incorrect serial transfer rates for XF551 high speed Put/Write and Write PERCOM commands. - Disk: Fixed H: device not handling zero-byte get/puts properly with burst I/O enabled (affected GET/PUT from BASIC). - Disk: H: device now supports OPEN with AUX1=7 to fix directory listing from DOS 2.5. - Disk: Disk explorer now properly increments volume sequence number when modifying SpartaDOS X images. - Disk: DSKINV hook now supports writes to sectors bigger than 128 bytes. - Disk: Fixed crash with very short disk images. - CPU: Fixed undocumented $BB opcode using abs instead of abs,Y addressing mode. - CPU: Undocumented $6B opcode now supports decimal mode. - Debugger: Profiler sometimes lost track of intermediate call frames during function sampling. - Debugger: Mouse wheel now uses system wheel scroll setting. - Debugger: Improved parsing of MADS listings. - Debugger: Fixed command escaping so that escapes are no longer processed unless enabled, i.e. \"foo\nbar". - Debugger: Register (r) can no longer clear bits 4 and 5 of P when unsupported by current CPU mode. - Debugger: _ and . are now accepted as part of symbol names in expressions. - Debugger: Fixed crash when attempting to load empty file as symbol file. - Debugger: Source path matching now allows partial path matches both ways and has improved behavior with duplicate filenames in different directories. - Debugger: Fixed wrapping of frame counter in history window. - Debugger: Built-in kernel symbols now take priority over loaded symbols. - Debugger: Fixed page scrolling in history window after enabling CPU history tracking. - IDE: Added mandatory Recalibrate, Read Verify, Read Multiple, Write Multiple, Seek, Set Multiple Mode, and Initialize Device Parameters commands. - IDE: Fixed response from device 1 status register. - IDE: Improved response from Identify Drive command. - IDE: Set transfer mode command is now supported. - Cartridge: Reverted OSS 034M mapper back to original bank order and added OSS 043M mapper mode for alternate bank layout. - Input: Fixed crash when activating triggers to unavailable controllers. - PIA: Implemented IRQB and control bit 6. - HLE: Fixed escape handling in display handler. - HLE: Screen setup now matches the display list and playfield addressing of the stock OS ROM. - HLE: Fixed cartridge handling so that cartridges are run after disk boot completes. - HLE: Added known RTS instruction at $E4C0. - HLE: CIO now allows SPECIAL commands to be issued on a closed IOCB. - HLE: Boot loader now sets DBYTLO/DBYTHI to $0400 before launching. - HLE: Fixed crash in CIO on OPEN command with unknown device. - HLE: S: now supports the Get Status, line, and fill commands. - UI: Disk sector display was incorrect for accelerated writes. - UI: Fixed crash if DirectX 9 is not installed. - UI: Display window can no longer be undocked in full screen mode. - UI: Adjusted default NTSC color preset. The old preset is still available. - UI: Command-line processing now better matches standard VC++ escaping rules. - UI: Direct3D9/OpenGL rendering now works over Remote Desktop with Windows Vista/7. - SoundBoard: Restricted $D5/D6xx mapping to $D500-D53F and $D600-D63F. - POKEY: Fixed incorrect latching on IRQST bit 4 (serial output ready IRQ). - POKEY: Fixed deassert timing for IRQST bit 3 (serial output complete IRQ). - POKEY: Added partial emulation of SKSTAT bit 4 (direct input) during disk transfers. - Cassette: Fixed data blocks being silently dropped when reading some .cas files. - Cassette: Fixed inaccuracy in data rate produced from loading .cas files. - GTIA: Fixed incorrect color for %%1000 pattern in mode 10 with lores ANTIC input. - VBXE: Warm reset no longer resets all registers like a cold reset. Источник: http://www.virtualdub.org/altirra.html

Страница 1 из 1	Часовой пояс: UTC + 3 часа [ Летнее время ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/